Station number:	Station name:
Office:	Reviewer:
Date of review:	Qm(s) inspected:

Measurement Notes and Summary	Yes	No
Are Qm notes complete & are notes about field conditions adequate?
Comment:
Weather & other meas. factors described?
Comment:
Is the Qm location characterized?
Comment:
ADCP time synchronized with logger/DCP?
Comment:
Is the latest OSW-recommended software being used?
Comment:
Is the OSW-recommended firmware being used?
Comment:
Was the discharge summary wizard used?
Comment:
ADCP depth measured and logged (as best as you can tell)?
Comment:
Is a diagnostic test done prior to every Qm or a minimum of once per day?
Comment:
Are compass calibrations done for every measurement?
Comment:
Were independent water temperature measurements made for each Qm?
Comment:
Are moving-bed tests (MBTs) made, and recorded?
Comment:
Is the duration of MBTs correct?
Comment:
If a moving bed condition is detected, is any adjustment to the measured discharge made? How?
Comment:
If a moving bed condition is detected, is DGPS being used?
Comment:
Is the source of magnetic variation/declination recorded?
Comment:
Is the magnetic variation/declination appropriate?
Comment:
Was configuration proper for measurement section?
Comment:
Were any user commands used?
Comment:
Are measured discharges within 5% of the mean of all transects? If not were 8 transects obtained or the reason documented?
Comment:
Are Qm's made consisting of at least 4 transects, 2 pairs of reciprocal courses (for steady flow conditions)?
Comment:
Is there evidence of directional bias in Q’s?
Comment:
Are edge distances measured (not estimated)?
Comment:
Are edge discharges relatively consistent?
Comment:
Are widths consistent?
Comment:
Are areas consistent?
Comment:
Were files locked?
Comment:
Are boat velocities reasonable for conditions?
Comment:
Is the number of ensembles reasonable?
Comment:
Are ambiguity velocities evident?
Comment:
Are threshold values used and appropriate?
Comment:
Is section(s) suitable for ADCP discharge measurements?
Comment:
Are appropriate starting and stopping points used?
Comment:
Are extrapolation methods evaluated and are they appropriate?
Comment:
Pitch and roll reasonable?
Comment:

General Comments: (insert screen captures with comments to illustrate the problem or comment)