Training
Classes
Webinars
On Demand

Moving-Boat Deployments
Guidance
Software
Deployments
Tech Tips
References

Index Velocity
Instruments
Guidance
Software
Deployments
Tech Tips
References

Mid-Section Measurements
Guidance
Software

RDI Tools

A compilation of both WINDOWS and DOS based utility programs for Teledyne-RDI ADCPs. This compilation allows testing through a WINDOWS based program and then data handling through several WINDOWS and DOS based programs. The most commonly used software included is BBTALK, which is used to manually or automatically test an ADCP.

Version	Status	Changes and Known Issues
3.09	Recommended	- Significantly improved Serial Port detection times, especially with Bluetooth serial ports. - Fixed numerous issues with missing data and locking up when communicating with Bluetooth devices.
3.08	Allowed	-added RiverRay compatibility -fixed BBTalk crashing if double-clicked on empty window -added Vista compatibility
3.07	Allowed	-fixed problem with Bluetooth drivers

Software/Firmware Status Definitions

Required Minimum: Minimum version required. This version has proven stable and may contain enhancements that are significant over previous required versions

Recommended: Shown to have been reliable and contains features that result in a recommended upgrade over the required version. There could be a few specific use cases where this version may have issues that would result in some users not using this version. If so, those cases will be noted.

Allowed*: Deemed reliable during initial testing. Any issues will be noted along with improvements available over prior versions. Use of allowed versions may be desired in cases when the changes benefit a significant number of the user's conditions or equipment. For example: a new version of software is released that adds support for new hardware. If the user has this hardware, they would need to upgrade to the newer software before it becomes recommended or required. Use of these versions by experienced users will also help OSW identify any unknown issues.

Testing*: OSW is currently testing; any known issues or advantages over prior release will be noted. The use of a version that is in testing should usually be limited to advanced users that can trouble shoot potential issues and provide feedback on any irregularities or problems observed.

Do Not Use: A version either prior to the required minimum or that contains issues that significantly affect operations.

*Note: A version may remain in Allowed or Testing indefinitely. Example: A new version is released while the prior version is still in Testing. In this case the prior version may remain in Testing, while future testing efforts are placed on the newer version.

Return to Moving-Boat Deployment - Software and Firmware

Links to the manufacturer's software and firmware are provided primarily as a service for USGS users. However, in some cases, access has also been provided for other agencies with the manufacturer's permission. Software or firmware without a direct download link should be obtained from the manufacturer.